Quantcast

No Signal from HDMI IN - Logik with built in freeview

Discussion in 'Sony's NSZ-GS8 / NSZ-GS7' started by james201, Aug 7, 2013.

  1. james201

    james201 New Member

    Joined:
    Aug 7, 2013
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    0
    Hi all,

    I know that there are a couple of posts which mention this error message but the solutions mentioned have not worked for me so I thought that I would reach out for help with the specific of my setup and what I've tried so far...

    TV: Logik (with built in Freeview and DVD)
    Model: L22DVDB10
    Sony box: NSZ-GS7

    I've tried connecting the HDMI cable from the 'Out' port of the Sony box to the only HDMI port the tv has but it returns the same 'No Signal from HDMI IN' message.

    I've also set the resolution to 720p and tried setting 'Control for HDMI' to 'off' but nothing is working.

    If anyone could point me in the right direction it would be a great help.


    Thank you
     
  2. CatfishRivers

    CatfishRivers Well-Known Member

    Joined:
    Apr 5, 2011
    Messages:
    14,605
    Likes Received:
    877
    Trophy Points:
    113
    Hi. In the following article it says the resolution for your model TV is actually 1080i.

    Review : Logik HD Ready 22inch TV with DVD

    So go to settings and see if you can set resolution of your Sony NSZ-GS7 to 1080i.
     
  3. revue5

    revue5 Well-Known Member

    Joined:
    Aug 1, 2011
    Messages:
    1,099
    Likes Received:
    206
    Trophy Points:
    63

    Try this (from GS7 settings),

    1. All Apps > Settings > Picture & sound > Wide mode.

    2. All Apps > Settings > Picture & sound > Resolution(2D) > Auto/720P/1080i

    3. All Apps > Settings > Picture & sound > YCbCr/RGB (HDMI) > YCbCr (4:4:4) (not auto)

    4. All Apps > Settings > Picture & sound > Noise reduction > Off


    5. All Apps > Settings > Unit settings > Eco >
    Quick start: On
    Auto standby: Off

    6. All Apps > Settings > Unit settings > Control for HDMI > Off

    -----------

    if not,
    8. change #3 to "RGB" (not Auto)

    ------------

    if not,
    9. Replace the hdmi cable (even it works w/others) to High speed HDMI cables.
     

Share This Page

Search tags for this page
logik tv hdmi
,
logik tv hdmi no signal
,
logik tv hdmi no sound
,

logik tv hdmi not working

,

logik tv no signal

,
logik tv no sound
,
logik tv saying no signal
,
my logik tv says no signal
,
no signal on logik tv
,
sony nsz-gs7 no signal