Quantcast

HDMI 1.4 Cable Necessary?

Discussion in 'Vizio Co-Star' started by ebayaholic, Nov 26, 2012.

  1. ebayaholic

    ebayaholic New Member

    Joined:
    Nov 26, 2012
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    0
    I just received a Vizio Co-Star Google TV to upgrade my now aging Logitech Revue. I have contacted customer support for this issue, but I am apprehensive in their solution.
    Backstory: Turn unit on for first time, it loaded straight into the homescreen, hit the Vizio button on the remote, side menu popped up, I started to run the setup wizards. Popped up a firmware update, so I elected to update. Unit downloaded, rebooted, then nothing. Black screen. After about 10 minutes of nothing on the screen, I decide to unplug and plug back in the unit to restart it. Vizio logo pops up, then goes black. TV eventually turns blue and states no input detected.
    Kept unplugging, and plugging back in, got a promising screen saying it couldn't reboot properly and asked me to hit OK to reboot or if I wanted to do a factory reset. I elected to reboot, still same thing. Got the screen again, did a reset, still nothing.
    I contact support and in a nutshell, they state I need to have HDMI 1.4 cables due to HDCP. They said the video signal gets encrypted past the Vizio splash screen and that is why I cannot see any picture and just a black screen. I have HDMI 1.3 cables and have used them with no issues at all on my Logitech Revue and a Western Digital WDTV Live box. I believe my TV only has HDMI 1.3 inputs anyways (Philips 42PFL5704D), so I don't understand how upgrading the cable to a standard the TV theoretically cannot support would help? Should I bite the bullet and buy the cable for giggles and see if it works, or try to RMA the unit with them?
     
  2. reading

    reading New Member

    Joined:
    Aug 26, 2012
    Messages:
    16
    Likes Received:
    2
    Trophy Points:
    0
  3. seanwi

    seanwi New Member

    Joined:
    Sep 24, 2012
    Messages:
    113
    Likes Received:
    31
    Trophy Points:
    0
    I think that something in your update process went wrong and that's is your main problem
    If i were you , i will try RMA ASAP
    Godd luck
     
  4. Wisdom

    Wisdom New Member

    Joined:
    Aug 3, 2012
    Messages:
    2,064
    Likes Received:
    187
    Trophy Points:
    0
    Are you connected to a cable box or satellite receiver, if so is it a wired or wiFi connection ....? What is your broadband speed ...?

    I might be able to help you, take you time and answer all questions ... Even though you are having issues, their a possibility nothing is wrong with your Co-Star at all .... Before we began, unplug all HDMI cables and reverse them, make sure all HDMI cable are tight and firmly plugged into their ports ....
     

Share This Page